iAquaLink enabled
Features a built-in WiFi chip that allows you to monitor and control remotely, for complete control at your fingertips anytime, anywhere.
Product description
The EXO iQ PRO Mid is an elite all-in-one chlorinator with built-in WiFi, pH and ORP control, designed for medium pools up to 75,000 litres in a mild climate.
The EXO iQ PRO Mid adds ORP based sanitisation to the advanced automation of the EXO iQ pH, delivering precise water quality management for medium pools up to 75,000 litres in a mild climate. ORP continuously measures chlorine activity, allowing the system to automatically regulate output using a premium gold tip sensor. This enables true demand based sanitisation, keeping water consistently clear with minimal manual involvement.
With built-in WiFi and full iAquaLink integration, owners can view and control every aspect of the system remotely. The Aux2 port supports operation of a LumiPower light relay box or heater (one option). Built for Australian conditions, the EXO iQ PRO Mid provides high accuracy and fully connected water care.
Features a built-in WiFi chip that allows you to monitor and control remotely, for complete control at your fingertips anytime, anywhere.
Monitors and manages your basic water parameters, keeping pH levels in balance and perfectly regulated. The eXO also features automated chlorine management via a commercial grade ORP sensor (only applicable to PRO models).
Note: Acid should be diluted at least 1:1 (water:acid) however it is also acceptable to dilute as heavily as 2:1 (water:acid) depending on your preferred maintenance routine.
Automatically regulates output in cold water which prevents excessive wear and tear on your cell, helping to reduce costs.
Provides greater control over pump speed and helps reduce energy consumption. The eXO can communicate to RS485 enabled pumps.
| Specification | WW000187PRO | WW000188PRO |
|---|---|---|
Model | Mid | Large |
Cell Output | 25 g/h | 35 g/h |
Maximum Average Pool Size | 75,000L (based on a mild weather climate, please adjust for cooler or hotter) | 100,000L (based on a mild weather climate, please adjust for cooler or hotter) |
Recommended Salinity | 4,000ppm | 4,000ppm |
Plumbing Capacity | 40mm / 50mm | 40mm / 50mm |
Operating Mode(s) | Normal = adjustable by 10% increments from 0% - 100%. Low Mode = adjustable range 0 to 30%. Boost Mode = continuous 100% for 24hrs. | Normal = adjustable by 10% increments from 0% - 100%. Low Mode = adjustable range 0 to 30%. Boost Mode = continuous 100% for 24hrs. |
Equipment Control | Filter pump: Any single speed pump or Zodiac® variable speed pump. Lights: Any single colour light or any Zodiac/Jandy sequence Muliticolour light (note will require additional relay box part number WW000222) | Filter pump: Any single speed pump or Zodiac® variable speed pump. Lights: Any single colour light or any Zodiac/Jandy sequence Muliticolour light (note will require additional relay box part number WW000222) |
Cell Protection | Temperature sensor controls chlorine output in cold water conditions assiting to protect cell against excessive wear and tear. | Temperature sensor controls chlorine output in cold water conditions assiting to protect cell against excessive wear and tear. |
Warning Indicators | "Low salt" indicator light: Reduced production to protect the electrode. “No flow” message: Production is interrupted as long as conditions are not ideal. | "Low salt" indicator light: Reduced production to protect the electrode. “No flow” message: Production is interrupted as long as conditions are not ideal. |
Power Supply / Operating Power | 196W; 110-240 VAC; 50/60Hz | 196W; 110-240 VAC; 50/60Hz |
Power Pack Dimensions (H x W x D) | 370mm x 320mm x 100mm | 370mm x 320mm x 100mm |
Cell Dimensions (H x W x D) | 160mm × 320mm × 110mm | 160mm × 320mm × 110mm |
Acid Dilution | minimum 1:1 (acid:water) can be up to 2:1 (acid water) | minimum 1:1 (acid:water) can be up to 2:1 (acid water) |
eXO iQ PRO Chlorinator - Datasheet
eXO iQ PRO Chlorinator - Manual