Halo Doser & Sensors

Halo Water Chemistry Control

Takes control of your water chemistry management. Ensures your pH levels are maintained and balanced, and keeps your chlorine levels healthy. Cuts down on maintenance and ensures a healthy pool at all times.

To get the most out of your Halo Doser, you must dilute your acid by approximately 2 parts water to 1 part acid (this is based on a Hydrochloric acid concentration of between 30% - 37%). This will prevent premature failure of any of the parts within the acid pump. Plus always remember to add acid to water and never water to acid and wear appropriate protective equipment.

Halo Installation Table

- A full circle denotes the Halo product is required for equipment to be controlled
- A half circle denotes the Halo product is optional to control the equipment

~ Halo Chlor is required for all Halo products to operate (excluding Halo Lite which can control lights independently if required)
* can communicate with AstralPool and Zodiac VS pumps for speed operation
** needs transformer
^ refer online for complete connectivity matrix
` cannot exceed 9.5 amps total load